POSHING PROCESSING manufacturer from China Poshing Internatioanl Industry Limited.

Place of Origin:

, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

This series is including: Digital Audio Processor, Active Crossover, Enhencer, Compressor, Equlizer, Sequency Controller, Mixing Console

ACTIVE CROSSOVER FP-232

Frequency point gain compensation function, It happen distortion when frequency response unbalance without the function and The extent of frequency point get attenuation deeply, disjoint between treble and bass frequency. Under this function. It can reach the best tone and is beneficial to joint the frequency point of treble and bass frequency. Middle keystoke is the selection of slope. Press the button, input less than 150Hz bass signal. The octave fade is 36dB/ OCT, no Mediant output. The range of bass frequency is very pure. Tone sounds fructify.

EQUALIZER EQ-231

1. requency Bands:2x31 band,1/3 octave

2.Filter type: constant Q, 3% center accuracy

3.Range of Filter control:+/-6dB or +/-12Db

4.Frequency response:20Hz to 20KHz,+0.5dB

5.Total harmonic distortion:<0.3%

6.Signal to noise ratio:>-95dB

7.Crosstalk:>-60dB

8.Standard input sensitivity:1.4v

9.Input impedance(balance/unbalance)

10.Output impedance:typical <150

11.Dimension:483x180x87mm

12.Carton Size:515x240x155mm

13.Net weight :3.72KG

14.Gross weight : 4.43KG

SEQUENCY CONTROLLER SC-815 (WHITE)

1.Power up or down 8 unit of equipments

2.Max. power outlet capacity:220V/50A

3.Max. output current for each channel:15A

4.Delay time for each channel:1s

5.Power supply:220~240V,AC,50/60Hz

6.Dimension:483x223x48mm

7.Carton Size:540x368x125mm

8.Net weight :4.21KG

PROFESSIONAL MIXING CONSOLE HMX-802/HMX-1202/HMX-1602

Simple, agility, high-efficiency.Over-load show light warn according to different over-load(front-mic & back-mic, back-EQ & post-fader )Refined, super linear GB30 mic pre-amplifier Supply professional +48V eidolon power for capacitance mic.Supply professional input for the outside signal Different single-track & 2 stereo input. 2 way assistant send, both can switch pre-fader or post-fader.Built-in power supply.Simple installation of frame.(choose to buy)
Mic InputOne balanced XLR connector, connect the balanced and unbalanced signal input, -128dB equivalent noise low-noise mic pre-amplifier, clean pure sound.Line Input One balanced 1/ 4" mic jack, connect with balanced or unbalanced electronic music signal,such as keyboard instrument.Input With EQ or other signal processor for compress mediant or enhance, if need, can use for more sound track record.Gain Each input, with a rotating gain controler, adjust signal gain, the range: from+5 to +60dB. Linear circuit built-in pre-amplifier send smooth gain control.
EQ With 3 mono balanced, HF offer 15dB upgrade or attenuation for frequency above12KHz. 2 middle frequency scan controler offer 15dB upgrade or attenuation for 140Hz-3KHz. LF offer +/-15dB upgrade or attenuation less than 80Hz.AUX assistant Mixing for monitor signal send by separately, or mixing for fun signal send by each way 2 AUX. Each AUX main line can switch to main fader head or back.A/V control(pan) Muting & SOLO Each pan A&V adjust all control including: left , middle and right stereo .,Muting attenuate all signal, SOLO send solo signal to monitor.Faders & signal lights Each channel has one 60mm smooth fader and LED light to show over +17dBu peak